Product Ref B16


19" 1U RACK
POWER DISTRIBUTION PANEL, MADE TO ORDER, THERE
IS 3 X 1U PANELS TO CHOSE FROM
AS THE BATTERY BOX MINIMUM
FUSE DEPENDS ON THE CHARGE RATE, ITS A BIGGER FUSE THAN IS NEEDED FOR MOST EQUIPMENT,
SO THIS PANEL CAN BE FUSED AS REQUIRED AND HAVE AN L.E.D INDICATOR ON EACH FUSED
SECTION. ALSO
YOU CAN HAVE A VOLT METER OR AMP METER IN THIS PANEL AND A CHOSE OF CONNECTORS
THE CONNECTIONS USED ON THE BATTERIES
24 VOLTS battery box output
with 4 pin XLR connectors is on PIN 1 NEG (-), PIN 3 POS (+) this lead has orange
colour code
12 VOLTS battery box output
with 4 pin XLR connectors is on PIN 1 NEG (-), PIN 4 POS (+) this lead has yellow
colour code
24 VOLTS battery box output
can be fitted with a 2 pin SPEAKON connectors PIN - 1 NEG (-), PIN + 1 POS (+)
a 2 pin Speakon is preferred because you cannot plug 4 pin Speakon plug into
it. The 4 pin is fitted to the 12 volt battery box
12 VOLTS battery box output
is on a 4 pin SPEAKON connectors is on PIN -1 NEG (-), PIN + 1 POS (+)
The 4 pin NC4FX is a 9
amp connector so the box max fuse is 9 amp, if you would like a 20 amp output
I can fit the SPEAKON connector
I can supply a Neutrik 4
pin to 4 pin 10 amp output leads £25
Neutrik 4 pin to 2 X 4 pin
10 amp output Y leads £35
Above leads with NC4MRX 4-pin
XLR Right Angle plug add £3.50
Neutrik output lead 4 pin/m
to 2 x Hi-ros 4 pin plug £50
Neutrik output lead 4 pin/m
to 4 x Hi-ros 4 pin plug £75
4 pin to clips for charging
your car battery £15
To buy this item please telephone:
Mike Harris 01932 241 948, or click the contact button for more options.