exprorecorders.uk
New Stereo Leads For NAGRA IV-S, IV-S T/C & IV-SJ Tape Recorders
Items For Sale
...We courier worldwide. Click on each image for more item details where provided.
NSL1
Stereo NAGRA IV-S Input Lead
For NAGRA model: - IV-S or IV-S Time COD
This lead is a 7 pin Binder plug to 2 x XLR 3 pin plug
with 47k pads in the plug to mach the Nagra to 600
Ohms
Lead is a copy of the Nagra QCSE input lead
Red XLR is Left and the Green is Right, like the NAGRA
meter and control knobs
These leads are made up using low noise pro cable
and are normally 1.5 metres in length but can be up
to 3 metres just add a £1 NSL1L
£40
NSL2
Stereo NAGRA IV-S & IV-SJ Output Lead
For NAGRA model: - IV-S or IV-S Time COD and IV-SJ
This lead is a 7 pin Binder plug to 2 x XLR 3 pin lead
plugs
Red XLR is Left and the Green is Right, like the
Nagra meter and control knobs
These leads are made up using low noise pro cable and
are normally 1.5 metres in length but can be up to 3
metres just add a £1 NSL2L
£35
NSL3
NAGRA IV.SJ Line 2 Channel Input Lead
For NAGRA model: - IV.SJ reel to reel tape recorder
With 2 X 7 pin binder plug to 2 XLR sockets, 1.5m lead
Red XLR is channel 1 input to 7-pin binder plug
with red sleeve
Black XLR is channel 2 input to a 7-pin binder plug
Normally 1.5 metres
£50
NSL4
NAGRA IV.SJ 2 Channel Line Input Lead
For NAGRA model: - IV.SJ reel to reel tape recorder
With 2 x 7 pin binder plug to 2 rca phono plugs, 1.5m
lead
Red RCA phono is channel 1 input to 7-pin binder
plug with red sleeve
Black RCA phono is channel 2 input to a 7-pin binder
plug
These leads are made up using low noise pro cable
and are normally 1.5 metres in length but can be up
to 3 metres just add a £1 NSL1L
£45
NSL5
Stereo NAGRA I/4" Jack Output Lead
For NAGRA model: - IV-S reel to reel or IV-S time
code
or IV-SJ output only
This lead is 7-pin binder plug to red left &
white right 1/4" jack plugs & 1.5m
Lead plugs into the line output socket on your stereo
NAGRA
Line output socket has an minimum impedance load of
500 ohm, & output voltage of 1 volt at 0 db
£30
NSL5A
Stereo NAGRA I/4" Jack Input Lead
For NAGRA model: - IV-S reel to reel or IV-S time
code
This lead is 7-pin binder plug to red left & white
right 1/4" jack plugs & 1.5m
Lead plugs into the line input socket on your
stereo NAGRA for inputs from line
Has 47k in each input channel for when connected to
600 ohm
£35
NSL6
Stereo NAGRA i/4" Jack Input or Output Lead
For NAGRA model: - IV-S reel to reel or IV-S time
code
Or IV-SJ output only
This lead is 7-pin binder plug to stereo 1/4" jack
plugs. Left to tip green to ring and is 1.5m
Lead plugs into the line input socket on you stereo
NAGRA for inputs from a mixer or guitar amp
£28
NSL7
Stereo NAGRA Line Input or Output Lead
For NAGRA model: - IV-S, DH or DSM amp or IV-SJ
output on reel-to-reel tape recorder
This lead is a line input or output lead for NAGRA
IV-S, and can be connected nagra IV-S to NAGRA IV-S or
to DSM amp or mono NAGRA, just plug the red and green
plugs into each other, this will also work to a DH amp
Lead is also an IV-SJ line output lead
7 pin binder plug to 3 x banana plugs, 1.5m lead
Red is left? This is so the red plug is to
the red meter needle, the red control knob, and is
the left track on the NAGRA
£35
NSL8
Stereo NAGRA Line Output Lead
For NAGRA model: - IV-S on reel-to-reel tape
recorder.
Can be connected as stereo or mono output
2 x rca phono plugs to 2 sets of banana plugs, 1.5m
lead
Red is left? This is so the red plug is to the
red meter needle, the red control knob and is the left
track on the NAGRA
Can use adapter NSl7 with this lead
£30
NSL9 & NSL9A
Stereo NAGRA Input & Output Lead
For NAGRA model: - IV-S or IV-S T/C or IV-SJ output
on reel-to-reel tape recorder
7 pin binder plug to 2 rca phono plugs, 1.5 m lead
Red phono is left and black phono is right. Plug
the 7 pin binder plug into the stereo NAGRA input or
output socket
NSL9A - You will need this input lead with 47k pads in
the 7 pin binder plug if your equipment has 600 ohm
rca phono outputs
£35 & £39
NSL10
Mono NAGRA XLR 3-pin Adapter for NSL9/NSL9A
Lead above
For NAGRA model: - IV-S or IV-S T/C or IV-SJ output
on reel-to-reel tape recorder
IV.L / 4.2 input & output lead
If you wish to plug into and out of an XLR 600 ohm,
you will need this adapter to connect to the lead
above
XLR/plug 3pin output adapter to phono with 100k pad
Plus XLR/socket input adapter to phono with 9k pad
£39
NSL11
Stereo NAGRA IV-SJ Input Lead
For NAGRA model: - IV-SJ reel-to-reel tape recorder
This lead is 2 x 7 pin tuchel/binder plug to stereo
TRS jack
Connected for patch bay that is tip right, ring
left & common screen
The IV-SJ is 100k input so no pad needed
£40
NSL12
NAGRA IV-SJ Dynamic Microphone Input Lead
For NAGRA model: - IV-SJ reel-to-reel tape recorder
With 8 pin lemo plug to 3 pin XLR lead socket, 2m
microphone lead
This lead will give you one channel of the IV-SJ
Unless you have a mono switch the lemo plug will cost
£30
£65
NSL13
Stereo NAGRA Output Lead
For NAGRA model: - IV-S or IV-SJ reel to reel tape
recorder
Banana plugs to 1/4 stereo jack plug, 1.5 m lead. this
lead can be made to a 3.5 jack plug
Can be used to record from an Ipad or computer
Also used as a mono NAGRA balanced output
Output up to 4.4 volt
£30
NSL14 & NSL14A
Stereo NAGRA Output Lead
For NAGRA model: - IV-S or IV-SJ reel to reel tape
recorder
7-pin TUCHEL plug to 3.5 stereo jack plug, 1.5M lead.
This lead can be made to a 1/4 jack
Can be used to record from Ipad or computer
Output impedance minimum load 500 ohm
Output 1 volt at 0 dB
NSL14A with 1/4 jack
£28
NSL15 & NSL15A
Stereo NAGRA Input Lead
For NAGRA model: - IV-S reel to reel tape recorder
7-pin TUCHEL plug to 3.5 stereo jack plug, 1.5M lead.
This lead can be made to a 1/4 jack
Has 47K PAD
NSL15A with 1/4 jack
You will need this lead if you are connecting to an
headphone output. However if you are connecting to
Line or Auxiliary outputs NSL14 is fine
£30